LevelOne GES-2452 - Manual (Page 30)

Web Smart Switch
30
The following table describes the labels in this screen.
LABEL DESCRIPTION
SNTP State Select Enable to use Simple Network Time Protocol (SNTP) or Disable
to set the time manually.
SNTP Server
Address If SNTP is enabled, enter the IP address of the time server you will use.
SNTP Server
Port It shows the Port Number of SNTP server.
Time
(HH:MM:SS) If SNTP is disabled, enter the new time in hour, minute and second
format.
Date
(YYYY-MM-DD) If SNTP is disabled, enter the new date in year, month and day format.
Time Zone Select system time zone by hours and minutes. “+” means after-UTC and
“-” means before-UTC.
Apply Click Apply to save your changes to the switch.