LevelOne GES-2452 - Manual (Page 29)

Web Smart Switch
29
The following table describes the labels in this screen.
LABEL DESCRIPTION
Auto
Configuration Select Enable or Disable this function.
IPv6 Address Enter the IPv6 address of your switch. If auto configuration mode is
disabled, enter IPv6 address in this field.
Gateway Enter the IP address of the gateway in dotted decimal notation. If auto
configuration mode is disabled, enter IPv6 gateway address in this field.
Apply Click Apply to save your changes to the switch.
Auto
Configuration It displays whether the auto configuration function is opened or not.
IPv6 In Use
Address It displays the in use address information of IPv6.
IPv6 In Use
Router It displays the in use router information of IPv6.
IPv6 Static
Address It displays the static address of IPv6.
IPv6 Static
router It displays the static router of IPv6.
3.2.3 Time
Click Network> Time in the navigation panel to display the screen as shown below.