LevelOne PLI-3110 - Manual (Page 9)

8
3 Operation
Operation is completely automatic, and no user intervention is required.
If your HomePlug devices have difficulty communicating with each other, check the following:
• Try plugging the unit into an adjacent plug.
• Use a pin and hold the Reset Button down for two seconds on each unit you are trying to connect. The unit
lights should flash. Then units will then connect based off factory settings.
• HomePlug Pro PoE works better when plugged directly into the wall socket. Connecting the HomePlug Pro
PoE into the power strip or surge protectors may degrade the network performance.