LevelOne PLI-3110 User Manual
Page 8
7
The procedure is as follows:
8. Press and hold the security button on Adapter C for 10 seconds and release it when device LED auto reboots.
The password to Adapter C becomes “Random_C”
9. Press and hold the security button on Adapter A for 2 seconds. The Power LED on Adapter A starts to flash.
10. Within 120 seconds after the Power LED on Adapter A starts to flash, press and hold the security button on
Adapter C for 2 seconds then release.
11. Adapter A, Adapter B and Adapter C are now networked to each other.
Removing Adapter B from Adapter A & C Network and join with Adapter D &
E to become Network BDE
The procedure is as follows:
12. Press and hold the security button on Adapter B for 10 seconds and release it. The password to Adapter B
becomes “Random B” and removes itself from Adapter A & C.
13. Press and hold the security button on Adapter D for 2 seconds.
14. Within 120 seconds after the Power LED on Adapter D starts to flash, press and hold the security button on
Adapter B for 2 seconds then release.
15. Adapter B and Adapter D are now connected to each other, which in turn becomes part of Network BDE.