LevelOne PLI-3110 - Manual (Page 5)

4
Front Panel LEDs
Power On - Normal operation.
Off - No power
HomePlug On - The Powerline network is active. This means that at least one other HomePlug de-
vice was detected.
Off - Powerline network is not available - no other HomePlug devices were detected.
Flashing - Data is being transmitted or received via the Powerline network.
Ethernet
PoE
PoE Detect
Security
Reset
On – Ethernet connection is active
Off – No Ethernet connection
Flashing – Data is being transmitted or received via the Ethernet Port
On – Power over Ethernet device connection is active
Off – No PoE connection
Flashing – Power is being transmitted or received via the PoE Port
On – PoE PD detect
Off – No PoE PD detect
This button is designed to generate an individual network group under multiple nodes en-
vironment.
Please refer to Security Button section for more details.
This button is used to clear ALL data and restore ALL settings to the factory default val-
ues. Press for 2 seconds and release the reset button to begin restore factory default.
Power LED Ethernet Port LED HomePlug LED
PoE Port LED PoE PD Detect