LevelOne WBR-6022 User Manual

Page 41

Text mode
Original mode

 Auto-Reconnect (Always-on): The device will link with ISP until the connection is established.

 Manually: The device will not make the link until someone clicks the connect-button in the

Status-page.

Virtual Computers (Only for Static and dynamic IP address WAN type)

Used when WAN is set as DHCP or Static IP, the user can assign a global IP address to a LAN IP
Address.

Virtual Computer enables you to use the original NAT feature, and allows you to setup the one-to-one
mapping of multiple global IP address and local IP address.

 Global IP: Enter the global IP address assigned by your ISP.

 Local IP: Enter the local IP address of your LAN PC corresponding to the global IP address.

 Enable: Check this item to enable the Virtual Computer feature.

DHCP Server

This page allows you to configure the DHCP server on the Router