LA STEELCRAFT FGS-24-1 User Manual
Steelcraft products, Sheet, Model
NOTE: SPECIFICATIONS ARE SUBJECT TO CHANGE
SOCCER GOAL
FGS-24-1
SOCCER GOAL
FGS-24-1
PARTS LIST
ITEM QTY. PART NO.
DESCRIPTION
1
1
F04SG241
HORIZ. 2-3/8" OD X 24'-0" (FRONT TOP)
2
1
F04SG242
HORIZ. 1-7/8" OD X 24'-0" (BACK BOTTOM)
3
2
F04SG251
VERT. 2-3/8" OD X 8'-0"
4
2
F04SG252
END STAYS 1-7/8" OD GALVANIZED PIPE
5
2
F04SG255
CORNER FITTING (LEFT & RIGHT HAND)
6
4
F02SG0UA U-ANCHOR
7
2
P02SG001
1/4" ALLEN WRENCH
8
10
1/2" X 3/4" SET SCREW
SHEET
DATE: 7/16/12
DRAWN BY: AFS
DO NOT SCALE DRAWING
STEELCRAFT PRODUCTS
MODEL
PHN 626-798-7401 FAX 626-798-1482
P.O. Box 90365 - Pasadena, CA 91109
1 of 1
2
4
3
1
5
ASSEMBLY AND INSTALLATION INSTRUCTIONS
1. LAY FRONT CROSS BAR FACE DOWN ON THE GROUND AND SLIDE THE VERTICAL POSTS
INTO THE END. TIGHTEN THE SET SCREWS.
2. SLIDE THE END STAYS INTO THE BOTTOM STUB ON THE VERTICAL POST. TIGHTEN SCREWS
3. RECHECK ALL THE SET SCREWS ON THE SLEEVES.
4. ROTATE THE ASSEMBLY INTO POSITION FOR PLAY. PLACE “J” ANCHORS IN BACK
BOTTOM HORIZ. FRAME OF GOAL TO INSURE THE GOAL WILL NOT TIP.