LA STEELCRAFT FLP-30 - Manual

30'
6'-0"
1
INSTALL IN 30" DIA. X 78" DEEP
3
2
5
GROUND LINE
CONCRETE FOOTING
ANTI-ROTATIONAL
PLATES
NOTE: SPECIFICATIONS ARE SUBJECT TO CHANGE
8'
INSTALLATION INSTRUCTIONS
1. DIG FOOTING AT PROPER LOCATION
30" DIA. X 78" DEEP
2. PLACE BASE POST (1) INTO FOOTING
AND SUPPORT IN A PLUMB CONDITION
WITH THE OUTSIDE EDGE OF PIPE TANGENT
TO THE OUTSIDE OF THE FOUL LINE.
TOP OF POST TO BE 9'-0" ABOVE FIN. GRADE
(NOT TOP OF SLEEVE)
3. INSTALL THE PANELS IN THE TOP POST (2)
USING THE CLIPS (5) AND BOLTS (4) . TIGHTEN
4. AFTER CONCRETE HAS SET 16 hrs. PLACE
THE TOP POST (2) IN BASE POST USING A
LIFTING DEVICE (CRANE) ROTATE THE POST
SO THAT THE PANELS ARE TO THE INSIDE
OF THE FIELD
5. REPEAT FOR OTHER FOUL LINE
DO NOT SCALE DRAWING
STEELCRAFT PRODUCTS
P.O. Box 90365 - Pasadena, CA 91109
DATE: 1/17/06 DRAWN BY: AFS
MODEL
PHN 626-798-7401 FAX 626-798-1482
FLP-30
FOUL POLE
SURFACE MOUNT DETAIL
FLP-30SM
SURFACE MOUNTED
AVAILABLE
15" X 15" X 1"
STEEL PLATE
ITEM QTY. PART NO DESCRIPTION
1 1 F04FP03X 5-9/16" OD Sch 40 POST
3 2 F02FP000 SCREEN
4 18 P01FP000 BOLT/WASH/NUT
5 2 F02FP001 CLIPS