AT&T 8434 - Manual (Page 41)

Test ✔
To test the lights and the
display on your voice
terminal
•
1 While on-hook or off-hook, press and hold [ Test ]
• Green light next to [ Test ] goes on
Note: If the green light next to [ Test ] flashes
rather than goes on steadily, it means the voice
terminal is not communicating with the PBX. In
such a case, see your system manager.
The lights go on steadily in four groups, and the
display fills in all the segments
2 To end test, release [ Test ]
• Lights return to pretest state; green light next to
[
Test ] goes off
Note: If the display or the lights do not respond
during test, notify your system manager.
Transfer
To send present call to
another extension or
outside number
✔
1 Press [ Transfer ] [dial tone]
•
•
Present call is put on hold and green light next to
the held call flutters
You are given a new call appearance
2 Dial number that call is to be transferred to
[ringback tone]
• Remain on line and announce call; if no answer or
busy, return to held call by pressing its [
xxxxx ]
3
4
Press [ Transfer ] again
Call is sent to dialed number •
Hang up
36