Inter-M HDMS-0808 - Manual (Page 10)

VIDEO AUDIO MATRIX SWITCHER
8 HDMS-0808
RS-232C Control RS-232C Control
- PROTOCOL
* RS-232C standard
* START Bit 1
* STOP Bit 1
* DATA Bit 8
* PARITY None
* DATA RATE 9600bps
* CODE ASC II
* TERMINATE
How to use How to use
1. Connect video device
Video input and output to be connected to this device should be connected to RCA JACK located at the
rear side of matrix switch by using component cable.
※ CAUTION : when connecting to other input/output device with component cable, component standard
order (Y, Pb, Pr) should be matched.
2. Connect audio device
Audio input and output to be connected to this device should be connected to RCA JACK located at the
rear side of matrix switch by using RCA TYPE CABLE.
At this time, L and R of RCA JACK located at the rear side of matrix switch should be matched.