APC Smart-UPS XL External Battery Pack SUA48RMXLBP3U - Manual (Page 5)

SUA48RMXLBP3U/SUA48RMXLBPJ3U External Battery Pack User Manual 5
Installation
Installation
Your external battery pack and UPS may vary in appearance from the examples depicted in this manual.
Install the Rails in the Rack
This UPS is intended for installation in a 19” rack.
For details on rail installation refer to the instructions in the rail kit.
Install the Battery Pack in the Rack
The external battery pack should be mounted below the UPS in the rack. Install the UPS and the external
battery pack at or near the bottom of the rack. If the UPS and the external battery pack are to be mounted in
adjacent racks use an APC approved extension cable. Refer to the APC Web site, www.apc.com for ordering
approved cables.
The UPS and the battery modules are heavy. Remove the battery modules to lighten the UPS
during installation.
4x
4x
! "
#
$
%