Maintenance – Alamo SR14 User Manual

Page 150

Text mode
Original mode

MAINTENANCE

SR20M/SR14M 04/94 Maintenance Section 5-20

STEP 4
Apply a small amount of Silicon sealer to the bore of the Hub Cap and to the outside diameter of the Seal .
FIGURE 42. Drive the Seal into the base of the Hub Cap. FIGURE 43-46. Care should be taken to keep the Seal
in line with the base when driving it into place.

FIGURE 42

FIGURE 46

FIGURE 43

FIGURE 44

FIGURE 45

This manual is related to the following products:

SR20