Alamo SR14 - Manual (Page 145)

MAINTENANCE
MAINTENANCE
SR20M/SR14M 06/98 Maintenance Section 5-15
© 2004 Alamo Group Inc.
DISASSEMBLY OF DIVIDER GEARBOX (Trained dealer personnel only)
STEP 1
Place the Divider Gearbox on a flat surface. Drive a sharp object through the Seal and force it out of the Hub Cap.
FIGURE 25.
STEP 2
Remove all eight of the M10 Bolts from both Cap Hubs, using a 14mm socket. FIGURE 26. Remove the Hub
Assemblies and gaskets from the Main Housing. FIGURE 27.
FIGURE 25
FIGURE 26
FIGURE 27