Sonnet Technologies Qio CF4 - Manual (Page 10)

B – Connect Qio CF4 to a Laptop Computer
Connect the PCIe 2.0 Bus Extender ExpressCard/34 adapter and
the Qio CF4 enclosure in the proper order, before you turn on your
computer:
1. Connect the external PCIe x1 interface cable to the PCIe 2.0
Bus Extender ExpressCard/34 adapter.
2. Insert the PCIe 2.0 Bus Extender ExpressCard/34 adapter
into your computer’s ExpressCard slot.
3. Connect the other end of the interface cable to the Qio CF4
enclosure.
4. Connect either the AC adapter or the optional XLR power
cable (connected to a battery or other power source). Note
that the Power Indicator LED on the Qio CF4 will not light
until after you turn on the computer.
5. Proceed to Chapter 6 – Windows User’s BIOS Setup Steps.
6
Chapter 5 – Windows User’s Hardware Installation and Connection Steps