Skc limited warranty and return policy – SKC 223-Series PowerFlex - Single User Manual
Page 4
4
Form 40069 Rev 1302
PowerFlex Charging System
Cat. No.
PowerFlex Single Charger
†
includes power
supply. Purchase pump-specifi c cables
separately; choose from list below.
100-240 V
223-2000
PowerFlex 5-station Charger
†
includes power
supply and cord. Purchase pump-specifi c cables
separately; choose from list below.
100-240 V
223-1000
PowerFlex Pump-specifi c Cables
†
Cat. No.
AirChek
®
2000
223-1001
Universal XR Series (5 cell)
223-1002
Universal XR Series (4 cell, MSHA)
223-1003
AirChek 52
223-1004
222
223-1005
† For U.S.-produced pump models only. Not compatible with Ex or ATEX-approved models.
PowerFlex Technology
Charging NiCad/NiMH batteries is generally accomplished by applying constant current to the battery.
SKC PowerFlex Chargers use a technology that is new to industrial hygiene equipment batteries.
Refl ex charging
†
delivers pulses of current instead of constant current to charge batteries. In between
pulses, PowerFlex applies short reverse pulses that discharge the battery slightly and short pauses.
This eases the battery into a full and uniform charge. It helps to prevent dramatic increases in internal
temperature and pressure that can damage the battery and shorten its life.
† Patented by Galaxy Power, Inc.
Note: Discharging the pump battery before charging is not necessary with this system
because the charging technology does not promote memory. However, if the user
desires to discharge before charging, simply run the pump until it stops, then
charge the battery.
SKC Limited Warranty and Return Policy
SKC products are subject to the SKC Limited Warranty and Return Policy,
which provides SKC’s sole liability and the buyer’s exclusive remedy. To
view the complete SKC Limited Warranty and Return Policy