SilverStone TS432U - Manual (Page 24)

TS432U
23
ENGLISH
1. Select “Setup” using the arrow button. The following screen will be displayed:
“Auto Compare” automatically compares the source and target hard drive after every copy operation.
2. Press ENT and use the arrow button to scroll to “Auto Compare”. The following screen will be displayed:
Duplicator Mode User Guide
Operation
Main menu: Setup menu: 5-1 Auto Compare
3. Press ENT to display the current configuration setting. (Default setting is “Disable”)
4. Use the arrow button to modify the setting.
Use the UP or Down buttons to enable or disable “Auto Compare”.
5. Press ENT to save the setting.