SilverStone TS432U - Manual (Page 22)

TS432U
21
ENGLISH
1. Select “ReScan Bus” using the arrow button. The following screen will be displayed:
The “ReScan Bus” function redetect for installed hard drives in the TS432U.
This can be used when you change drives without restarting the system.
4. When “ReScan Bus” is complete, the following screen will be displayed:
3. Press ENT to begin “ReScan Bus”
2. Press ENT to select. The system will prompt you to confirm that you wish to proceed.
Duplicator Mode User Guide
Operation
Main menu: ReScan Bus