SilverStone ST60F-ESB - Manual (Page 3)

STRIDER ESSENTIAL SERIES
02
* The power supply must operate at above frequency with 103.5 - 253VACrms
input voltage range.
2.3 Max. Input AC Current
Max. Input Current
Measuring Range
------------------------- ------------------------
10A 103.5 - 253 Vrms
2.4 Inrush Current
The power supply must meet inrush requirements for any rated AC voltage,
during turn on at any phase of AC voltage, during a single cycle AC dropout
condition, during repetitive ON/OFF cycling of AC, and over the specified
temperature range. The peak inrush current shall be less than the ratings of
its critical components (including input fuse, bulk rectifiers, and surge limiting
device).
2.5 Efficiency
ST70F-ESB and ST60F-ESB provide an efficiency of 82% when measured at full
load under 115V/60Hz and 230V/50Hz condition.
3.Output characteristics
3.1 Normal Operation Output
SST-ST70F-ESB：
Output
Voltage
Load
MIN
Range
MAX
Peak Regulation
Ripple & Noise
P-P Max.
1. +5V
2. +3.3V
3. +12V
4. -12V
5. +5Vs
0.2A
0.1A
0.6A
0.0A
0.0A
22.0A
22.0A
52.5A
0.3A
2.5A 3.5A
±5%
±5%
±5%
±10%
±5%
50mV
50mV
120mV
120mV
50mV
Maximum continuous total DC output power should not exceed 700W.
Maximum continuous combined load on +3.3VDC and +5VDC outputs shall
not exceed 130W.
Maximum combined load on 12V outputs shall not exceed 630W.