SilverStone NJ520 - Manual (Page 5)

NIGHTJAR SERIES
04
2.4 OVERSHOOT
Overshoot at turn on or turn off shall be less than 10% of the nominal output
voltage.
2.5 TIMING, HOUSEKEEPING AND CONTROL
A low active PS-ON (DC ON/OFF) input signal is equipped, which provide the
interface ENABLE or to DISABLE the GROUP1 of DC output. This signal is
electrically to interface with TTL,OPEN COLLECTOR and the HARD SWITCH.
SIGNAL NAME MAXIMUM MINIMUM
T1
T2
T3
T4
T5
T6
PS_Power-on time
Rise time from each main output
PWR_ok delay
PWR_ok rise time
AC loss to PWR_OK hold-up time
PWR_OK inactive to DC loss delay
500mS
20mS
500mS
10mS
0.2mS
100mS
16mS
1mS