SecurityMan OutdoorWatch User Manual
Page 10
10
DO NOT Expose the Li-battery to heat, and
avoid impact
*The above-mentioned operation will cause
explosion
DO NOT use the camera in the places that
are covered by metal.
*Places surrounded by metal, such as eleva-
tor and cabinet, might shield the electromag-
netic wave resulting in signal lost.
DO NOT use the camera in complex envi-
ronment. The obstruction of stumbling
block will affect the electromagnetic wave
and influence the receiving range.
*Wall, tree and other stumbling block might
absorb, reflect the electromagnetic wave and
influence the receiving range.
Please adjust the brightness on TV or on
monitor to achieve optimum efficiency.
*There are slight differences of brightness
among cameras which can be adjusted
DO NOT let several cameras with same
frequency work at the same time.
*The overlap of the electromagnetic wave sig-
nal of the same frequency might cause
severe interferences and unable to receive
signals.