SecurityMan IPcam-SD - Quick Start Guide - Manual (Page 3)

IPcam-SD Quick Start Guide (Android)
The SecurityMan IPcam-SD is
designed for quick and easy
installation. This guide will help you
get your camera connected to your
mobile device in 3 easy steps.
Step 1 HARDWARE
Step 2 INSTALL APP & SCAN QR CODE
1 2
1. Open the Play Store on your mobile device. Then search for and
install the “ IPCam Live” application. Once installed, tap on the
“ IPCam Live” icon (fig. 2.1), select “By Device” (fig. 2.2) and then
select the “ Add” button (fig. 2.3).
Fig2.1 Fig2.2
Fig2.6
Fig2.5 Fig2.4
Fig2.3
3. Now select your device (fig. 2.7) to bring up the live view screen (fig
2.8).
NOTE: The following images will appear stating “Connecting…” and
“Buffering…” If successful, your IPCam image will be displayed.
2. Tap on the QR Code Icon (fig. 2.4) and point your iPhone camera at
the QR Code located on the base of the camera and press “ Ok” once
the image is captured (fig 2.5). The serial number will be displayed
once the QR Code is scanned. At this point you may choose to
rename your device under “Device Name” and then press “ Save”
located on the upper right hand corner of the screen (fig. 2.6).
Insert a Micro SD
card (not included)
Connect the Ethernet
Cable to your Router
Attach the Antenna
Connect the
Power Adapter