SecurityMan Air-AlArmII series - User manual - Manual (Page 27)

23
Defense Zone Code Defense Zone Type Bypass Zone Delay Time to Alarm Compatible Accessories Remark
00 —— No No
Wireless Remote Controller
& Wireless Remote Control
Keypad
Up to 10 RC
1 to 5 24-hour Defense Line No No
Wireless Smoke Alarm,
Wireless Gas Alarm, & Panic
button.
Each defense
zone supports
up to 4 wireless
devices.
6 to 10 1st Defense Line
Yes (zone 11
to15)
Yes
Wireless Door Magnet &
Wireless Curtain PIR Sensor
11 to 15 2nd Defense Line
Yes (zone 6
to 10)
Yes
Wireless Wide-Angle PIR
Motion Sensor
Manufacturer Wireless Default setting:
Wireless
Sensor Type
Remote
Control
Wireless Smart
Door/Window
Sensor
Wireless Wide-
Angle PIR Motion
Sensor
Wireless Door-
bell Button
Wireless Curtain
10 PIR Sensor
(N/A)
Wireless Smoke
Alarm
Panic
Button
The default
Defense
Zone Code
00 06 11 10 --- --- ---
Note: If after setup the alarm system becomes uncontrollable or abnormal; please remove or cancel all of the default setting
of the wireless devices such as the remote control, door/window sensor, wide-angle PIR motion sensor, smoke alarm, doorbell,
and then add (re-program) them back into to their defense zone.
Air-AlarmII/b (standard Kit) Defense Zone Code Chart: