SecurityMan Air-AlArmII series - User manual - Manual (Page 26)

22
Functions/Features:
• Used for emergency panic, generally set as a 24 hour Defense Line.
• Placed under tables, beside bed whenever panic is needed.
• Replace battery every 2 years (varies on usage).
specifications:
• Operating power: 23A 12V Battery (Recommend: alkaline battery)
• Wireless Transmitting distance > 450ft (in open area)
• Service life: < 2 year
Installation and Usage:
Install in living rooms, bedsides, carry along, etc. For emergency use, scared away intruders; sends out emergency
signal to alarm host to sound off the siren(s). This is a 24 hour standby device for emergency use only. Please replace
the battery when the signal distance becomes weak or replace them every 2 years.
Adding and Cancelling Panic button:
To Add:
Step 1: Press PrGM + Password + enT + 70 + enT+ XX + enT The “ ” light will appear solid blue.
[The XX indicate zone number of the 24 hour defense line, including zones 01 through 05].
Step 2: Press the “Alarm” button twice consecutively, the alarm host will beep in series, the “ ” light will flash 5
times and then turn off to indicate the panic button has been successfully added.
To Cancel:
Press
PrGM + Password + enT+ 71 + enT+ XX + enT The alarm host will beep twice, the “ ” light will
flash once and then turn off to indicate the panic button has been successfully cancelled.
note: The alarm host can only learn 1 wireless device (Panic button) at a time, a total of 4 wireless devices
(Panic buttons) to a zone. If 1 device is removed from a zone that has 4 devices, then all 4 devices in the zone will
be removed, and each device will have to be added again by following the “To Add:” procedure above.