Actiontec electronic 802PSG - Manual (Page 50)

46
Actiontec 54 Mbps Wireless Multiport Print Server User Manual
47
Chapter 4 Using the Web Administrator
7. In next Wizard screen, the user can configure the Print Server to automatically
get its IP address from the network’s DHCP server, or manually specify a static
IP address. To configure the Print Server to automatically get an IP address
from the network’s DHCP server, activate “Enable Obtain TCP/IP settings
automatically.” To manual assign an IP address, activate “Disable Use the fol-
lowing TCP/IP settings” then enter “ IP Address,” “Subnet Mask,” and “Gateway”
addresses for the Print Server. Also, the Print Server’s DHCP server can be
enabled or disabled from this screen. When finished, click Save & Next.
8. In next Wizard screen, the SMB settings of the Print Server can be changed.
When finished, click Save & Next.