Robinair 342000 Refrigerant Service Solution - Manual (Page 28)

26
© 1999 Robinair, SPX Corporation
Maintenance
CHANGING THE FILTER-DRIER
(continued)
4. When the clearing is complete, follow the on-screen prompts.
5. Turn the unit OFF and disconnect the power cord from the power outlet.
WARNING
Always disconnect the unit from the power source before
making any repairs or replacements to components. Risk of
electrical shock!
6. Open the unit’s front panel, remove the old filter-drier and replace it with
a new one. Hand-tighten the new filter. Dispose of the used filter-drier
properly.
7. Close the front panel door.
8. Plug the power cord into an appropriate power supply. Turn ON the main
power switch. The display will show the FILTER CHANGE mode. Follow
the on-screen prompts.
9. Press the START key. The unit will run briefly to pull an internal
vacuum, removing any air that entered the system during the changeover.
10. Press MAIN MENU to exit when the process is complete.