Robinair 342000 Refrigerant Service Solution - Manual (Page 26)

24
© 1999 Robinair, SPX Corporation
RECOVER
• Verify that the service hoses are connected and the coupler valves are
open.
• The system must have at least 25 psi of pressure for correct operation of
the refrigerant ID.
SET-UP MENU (Use the UP/DOWN arrows to highlight selections)
• Language
- Press TOGGLE SELECTION to select English, Spanish, or French.
- Press the MAIN key to exit.
• Select Units (Selects the units of measure in English or Metric)
- Press TOGGLE SELECTION.
- Press the MAIN key to exit.
• Clock Adjust (Adjusts the date and time)
- Press the ENTER key.
- Use the UP/DOWN arrows to change the date and time.
• Change Elevation (Sets the altitude above sea level for your location)
- Enter the numeric value.
• Calibrate Pressure (Calibrates high and low side pressure transducers)
- Disconnect service hoses and press the ENTER key.
• Anemometer (Enables and calibrates optional anemometer)
- Instruction detail included with the anemometer.
• Manual Oil Drain (Allows user to manually drain any oil from the
342000)
- Press the ENTER key.
- Press the EXIT key.
• Hose Length
- Allows accurate charging with varying lengths of hose.
• Refrigerant Management
- Displays details on refrigerant usage.
Operating Instructions