Robinair TIF8800X Combustible Gas Detector - Manual (Page 9)

7
Instrument Status Indicators
There are five (5) instrument status
indicators, or LEDs, on the front of the
instrument. The indicators are explained
below, from top to bottom .
Power Indicator (red): This LED
illuminates when the instrument is On .
Low Battery (red): This LED illuminates
when a battery charge is needed . The
battery pack must be fully recharged
before the tool is used again .
Charge (yellow): This LED illuminates
during the recharge process .
Ready (green): This LED illuminates
when the charge cycle is complete .
A fully charged battery pack provides
up to three (3) hours of continuous
operation .
Fault (red): This LED illuminates only if
there is a problem with charging the
battery pack . Refer to the
Troubleshooting section of this
manual .
instrument
Status
indicators