Ransburg Air Line and Filter Heater A13230 - Manual (Page 8)

INTRODUCTION
Air Line Heater / Filter Heater - Introduction
Ransburg
LN-9811-14.1 6
Frequency: 50/60Hz
Power Rating: 1.5 kW
Max. Working
Pressure: 230 psig (16 bar)
Controlled Output
Range: 68° to 150°
(20° C to 65° C)
Minimum Inlet
Temperature: -4°F (-20°C)
Max Outlet Temp: 248° F, 120° C
Current Draw: 13.0 A
Recommended Fuse: 16 A
SPECIFICATIONS
Supply 115 Volt AC
Frequency: 50/60Hz
Power Rating: 1.5 kW
Max. Working
Pressure: 230 psig (16 bar)
Controlled Output
Range: 68° to 150°
(20° C to 65° C)
Minimum Inlet
Temperature: -4°F -20°C
Max Outlet Temp: 248° F, 120° C
Current Draw: 6.5 A
Recommended Fuse: 8 A
Supply 230 Volt AC
Ambient temperature, on high-speed applicators,
in automated finishing systems, is hard to maintain
due to the expansion of pressurized air, which re-
sults in condensation. The Ransburg Air Heater/
Filter Heater is designed to reduce, or eliminate,
condensation that may form in or on Air Turbines,
reducing high voltage trip-outs and rejected parts.
Air is heated through a simple process; air enters
through the filter, passes through a Manifold and
Volume Booster before entering the air heater and
exits out to the applicator.
DESCRIPTION
† This unit is not intended for use within the
hazardous area, (Class 1, Div 1, or Zone 1).
W A R N I N G !