Ransburg HV Junctin Tank LEPS5000 - Manual (Page 9)

SPECIFICATIONS
Input High Voltage: 100 kVDC maximum continuous
Output High Voltage: Six outputs; equal to or less than the input voltage depending on
model used and output current.
High Voltage Cable: Unshielded type; Ransburg part number SSW-1064 or approved
equivalent.
Electrical
GENERAL DESCRIPTION
The LEPS5000 High Voltage Junction Tank is a device which permits distribution of high voltage from
one power supply to as many as six electrostatic rotary or gun applicators. The high voltage com-
ponents are submersed in high quality transformer oil and contained in a five gallon container. For
most gun systems, the junction tank is supplied with individual output resistors in series with the high
voltage input. The resistor value used depends on the gun and application specifications (reference
the "Parts Identification" section and your Ransburg representative). Model LEPS5000-05 is Factory
Mutual listed with Aerobell 33 and Turbodisk 33 applicator systems. Model LEPS5000-05 is a direct
electrical feed through device and does not incorporate series resistors.
Model LEPS5000-04, Resistive Junction Tank, is Factory Mutual listed with REAIII Automatic Gun
Applicator Systems.
INTRODUCTION
Weight: Approximately 45 lbs.
(20.4 kg)
Size: 12" diameter x 16" height
(30.5 cm x 40.6 cm)
Mechanical
HV Junction Tank - Introduction
6
Ransburg
CP-98-01.3