beautypg.com

Connecting the access point – Airlink101 AP411W User Manual

Page 6

background image

6

Connecting the Access Point

Step 1

Connect one end of a network cable to the Ethernet port of the access point and

connect the other end of the cable to the LAN port of a router.

Step 2

Power on the access point by connecting one end of the supplied power adapter

to the power jack of the access point and connecting the other end to an electrical outlet.

Step 3

Make sure the Power and LAN lights on the Access point are lit, and the WLAN

light is blinking. If not, verify the cables are functional and try the above steps again.







See also other documents in the category Airlink101 Hardware: