beautypg.com

Airlink101 AP411W User Manual

Page 11

background image

11

Step 10

Select to enable or disable WEP encryption and click Next. If you already have

WEP encryption enabled for your existing wireless network, you must enter the identical
encryption settings here.

Step 11

Click Reboot to save and apply the settings.

Note: Once you have configured the settings, you’ll need to change the TCP/IP settings
back to dynamic IP. Follow steps 1 - 3 of this section and change the TCP/IP properties
back to “Obtain an IP address automatically.” Restart your computer afterwards.

For further configuration including WPA encryption, please use the Advanced Setup
link.

See also other documents in the category Airlink101 Hardware: