Caution, Compressor protection, Communicating thermostat – LOCKSTATE LS-60 Operation Guide User Manual
Page 16: Using usnap radios

PG
16
PG
16
Compressor Protection
The LS-60 has a minimum cycle time of 4 minutes to protect your
compressor in cool and in heat pump (if you have one). The Home screen will show a small clock and
A/C during this time and the compressor will not come on until the 4 minute delay is over.
Communicating Thermostat
The LS-60 has 2 RTM-1 radio ports. These allow your thermostat
to communicate with other systems.
Using USNAP Radios
The USNAP ports allow you to connect
your LS-60 to a wireless network. This can give you access to your
home’s HVAC system even when you are away. It can also give
you access to web based efficient energy management sites that
can help you save money and protect the environment.
To Insert a USNAP radio module:
Power off the LS-60. Insert the radio module in either slot on the
back of the LS-60. Power up LS-60.
To connect
to a network follow the instructions that came with the
USNAP module.
USNAP port
USNAP
radio
Caution
DO NOT INSERT or REMOVE USNAP radio
modules if power is ON. This can damage the
thermostat or radio modules.