Turning off and storing the cooker after use, Maintenance of outdoor cookers and accessories – King Kooker 2292 V Bottom Outdoor Cooker User Manual
Page 18
turnInG oFF And storInG tHe cooKer AFter use
neVer moVe tHe cooKer or Pot WHIle In use or stIll Hot [AboVe
100
°
F (38
°
c)].
1. After each use turn OFF the King Kooker
®
at the regulator first, then at the gas cylinder valve.
check to make sure there is no flame and all valves are off. Do not leave the cooker until it
has cooled completely. When removing food from the cooker wear protective mitts.
2. Disconnect the regulator from the cylinder by turning the Type 1 fitting counterclockwise until the
regulator is separated from the tank. Remove batteries from timer housing to avoid corrosion in
storage.
3. Storage of this cooker indoors is permissable only if the cylinder is disconnected and removed
from the cooker. Do not use or store cylinder in a building, garage or enclosed area. Read and
follow all cylinder manufacturer’s instructions. The cylinder must be stored out of the reach of
children at all times. Keep entire unit in area to avoid insects and contamination that can clog
the venturi tube.
FAIlure to FolloW tHese InstructIons And WArnInGs could result In FIre,
exPlosIon, burn HAzArd or cArbon monoxIde PoIsonInG WHIcH could cAuse
ProPerty dAmAGe, PersonAl Injury or deAtH.
mAIntenAnce oF outdoor cooKers And AccessorIes
1. The area where the cooker will be used must be kept clear and free from combustible materials,
gasoline and other flammable vapors and liquids. Before each use of the cooker inspect and
remove any combustible items.
2. The flow of combustion and ventilation of air must not be obstructed. The cooker must be set in
an open area with 10 ft. (3.05m) of space on all sides and no roof or overhang overhead. Check
the location and placement of the cooker before each use.
3. Before each use of the appliance check the burner/venturi tube for insects, insect nests, and
other obstructions. A clogged tube can lead to a fire beneath the appliance.
4. Follow all Lighting Instructions in the Use and Care Manual each time the cooker is used. Check
the flame for proper color and appearance. The flame should burn with a primarily blue color. If
a strong yellow flame is present, this could indicate an obstruction in the burner/venturi tube.
If there is any obstruction or a yellow flame, and the air shutter adjustment has not solved the
problem, turn off the cooker and allow time for it to cool. Disconnect the hose from the cooker.
Remove the air shutter using a phillips head screwdriver. Check the venturi tube with a flashlight
to see if there is a blockage. If a blockage is present use a wire such as a coat hanger to slide
into the venturi tube to remove the blockage. Reattach the air shutter to the venturi tube using
the phillips screwdriver. Assemble and light the cooker again as per the instruction manual. If
this does not resolve the problem, please call Metal Fusion, Inc. at (800) 783-3885.
5. Always use the LP hose/regulator and timer assembly supplied with the appliance. Before each
use of the appliance check the LP hose for evidence of abrasion, wear, cuts or leaks. If there
is any damage to the hose, the hose/regulator and timer assembly must be replaced prior to
using the appliance. Contact Metal Fusion, Inc. at (800) 783-3885 for information regarding a
replacement hose assembly. Only the LP hose/regulator and timer assembly specified by Metal
Fusion, Inc. should be used with the appliance.
6. For purchase of any replacement parts which may have become damaged or lost, please
contact Metal Fusion, Inc. at (800) 783-3885 between the hours of 7:30am-3:30pm (CST)
Monday through Friday.
18