Gentec-EO THZ-D - Manual (Page 9)

9
Revision 1.1
THZ-D Series Instruction Manual
Gentec Electro-Optics Inc. All rights reserved
THZ12D-3S-VP-D0
Monitor Compatibility
MAESTRO, M-LINK
(with latest firmware version only)
Effective Aperture Diameter Ø 12 mm
Projected Spectral Range 10 – 3000 µm 2
Reference Spectral Range 10 – 440 µm 2
Spectral Range 10 – 600 µm 2
Calibrated Spectral Range 10.6 µm
Power Noise Level
4 5
± 0.5 µW
Thermal Drift 6 12 µW/
o
C
Minimum Measurable Power 100 µW 7
Typical Rise time (0-95%) 3.0 s
Typical Sensitivity 200 mV/W
Calibration Uncertainty
± 3.0 % @ 10.6µm
±15% @ 10.6-440µm
3
Linearity with Power ± 2 %
Repeatability (Precision) ± 0.5 %
Power Resolution ± 0.5 %
Max. Average Power 3 W
Max. Average Power (1 min)
(cooling : minimum 3 min)
3 W
Minimum Repetition Rate
7 Hz with Anticipation
1 Hz without Anticipation
Max. Average Power Density
(1 W CW)
30 W/cm2
Max. Energy Density < 1 J/cm
2
Dimensions
(H x W x D, in mm)
With isol. tube:
73 x 73 x 80
W/o isol. tube:
73 x 73 x 28
Weight
(head only, with isolation tube)
0.316 kg
Cooling Heat sink
Recommended Load Impedance 100 kΩ
Output Impedance N. A.
Linearity vs Beam Dimension ± 0.7 %
PCB Electrical Supply N. A.
Max Output Signal N. A.
Specifications subject to change without notice.
4
Nominal value, actual value depends on electrical noise in the measurement system.
5
Without anticipation. ± 5 µW with anticipation.
6
At 150 µW.
7
Depending on thermal stability of the environment.