Thz-d series specifications, 3 thz-d series specifications – Gentec-EO THZ-D User Manual
Page 8
8
Revision 1.1
THZ-D Series Instruction Manual
Gentec Electro-Optics Inc. All rights reserved
2.3 THZ-D SERIES SPECIFICATIONS
The following specifications are based on a one-year calibration cycle, an operating temperature of 15 to
28ºC and a relative humidity not exceeding 80% and a storage temperature from 5 to 45 ºC with relative
humidity not exceeding 80%.
Specifications subject to change without notice.
2
From 10 to 440µm, spectrometer measurement with multiple laser references validation.
From 440 to 600 µm, spectrometer measurement only.
From 600 to 3000 µm, relative measurement only.
For more details refer to Appendix B.
3
Estimated on typical absorber spectral absorption measurements in the THz range.
THZ9D-20mS-BL-D0
Monitor Compatibility
MAESTRO & M-LINK
(with latest firmware version only)
Effective Aperture Diameter
Ø9 mm
Sensor
Pyroelectric
Absorber
BL
Projected Spectral Range
10
– 3000 µm
2
Reference Spectral Range
10
– 440 µm
2
Spectral Range
10
– 440 µm
2
Calibrated Spectral Range
10.6 µm
Max. Average Power
With MAESTRO : 20 mW
With M-LINK : 25 mW
Max. Average Power Density
50 mW/cm
2
Power Noise Level (RMS)
300 nW
Optical Chopper Frequency
10 ± 1 Hz
Typical Rise time (0-95%)
< 0.2s
Typical Sensitivity
120 V/W
Calibration Uncertainty
± 5 % @ 10.6 µm
± 15 % @ 10.6-440 µm
3
Dimensions (H x W x D, in mm)
Ø38.1 x 26.2
Weight
91 g