General Pump KFZ Repair Manual - Manual (Page 13)

GENERAL PUMP
A member of the Interpump Group
KFZ SERIES
Page 13
13. SCREW CALIBRATION
Description
Exploded View
Position
Fastening Torque
(ft. lbs.)
Fastening Torque
(Nm)
Cover fastening screws 9 7 10
Plunger fastening screws 29 15 20
Connecting rod caps
fastening screws
16 28* 38*
Head fastening screws 37 44** 60**
Valve cover screws 38 44*** 60***
Lifting bracket fastening screws 58 74 100
Oil Discharge plug 11 30 40
Delivery duct plug 11 30 40
* The connecting rod caps fastening screws must be tightened respecting the phases indicated in “Point D”
of page 6.
** The head screws and nuts, exploded view position 45 and 48, must be fastened using a torque wrench,
lubricating the threaded stem, respecting the order shown in the scheme in fig. 21
*** The valve cover screws, exploded position 29, must be fastened using a torque wrench, lubricating
the threaded stem, respecting the order shown in the schematic in fig. 21.
fig. 21