Finish Thompson BE-15/15C - Manual (Page 3)

3
Safety Precautions
WARNING:
READ, UNDERSTAND, AND FOLLOW THIS SERVICE MANUAL AND
THE “BE SERIES” OPERATION MANUAL COMPLETELY BEFORE
INSTALLING, OPERATING, TROUBLESHOOTING, OR SERVICING A
“BE” UNIT. FAILURE TO FOLLOW THESE PRECAUTIONS CAN
RESULT IN SERIOUS INJURY OR DEATH.
 ELECTRICAL WIRING, TROUBLESHOOTING, OR REPAIRS SHOULD BE
PERFORMED AND CHECKED BY A QUALIFIED ELECTRICIAN.
 WEAR PROPER EYE AND SKIN PROTECTION WHEN WORKING WITH THIS
EQUIPMENT.
 DO NOT OPEN THE FILL VALVE OR DRAIN VALVE DURING OPERATION OR
WHILE HOT. ALLOW A MINIMUM OF ONE-HALF TO TWO HOURS FOR
COOLING BEFORE DRAINING OR REFILLING.
WARNING:
STORE AND KEEP ALL FLAMMABLES AND COMBUSTIBLES A SAFE
DISTANCE FROM THE UNIT. A MINIMUM OF 20 FEET IS REQUIRED.
WARNING:
PROCESS GLYCOL-BASED ENGINE COOLANTS ONLY. NEVER
PROCESS FLAMMABLE OR COMBUSTIBLE LIQUIDS, OR ENGINE
COOLANTS CONTAMINATED WITH FLAMMABLES OR
COMBUSTIBLES.
WARNING:
ANTIFREEZE/COOLANTS AND REINHIBITORS ARE POISONOUS TO
PEOPLE AND ANIMALS AND ARE ALSO CORROSIVE. CLEAN UP
ANY SPILLS IMMEDIATELY.