AT&T 1450 - Manual (Page 14)

11
You can store 10 telephone numbers (up to 16 digits each) in the base
memory locations (0-9).
Store a Number in Base Memory
1 Press g on the base to enter programming mode.
The SPEAKER light flashes.
2 Press the dial pad key (0-9) for the location where you
want to store the number.
3 Enter the telephone number.
4 Press g to store the number. You will hear a
confirmation tone.
Dial a Number in Base Memory
1 Press
K.
2 Press g and then the memory location (0-9) of the
number you want to dial. The number is dialed automatically.
TELEPHONE MEMORY
AT THE BASE
1450_book_1ATT 3/26 3/26/02 4:59 PM Page 11