AT&T 1450 - Manual (Page 13)

TELEPHONE OPERATION
AT THE BASE
10
Indicates a new call
has been received
If you subscribe to telephone
company voice mail with a visual
message waiting signal, light
flashes when you have voice
mail waiting.
NOTE: When the handset is in use the Page/Intercom and
Handset Locator features are inactive.
Intercom/Page
1 Press and release to signal someone at the handset. A paging
tone sounds.
2 When the person at the handset presses
I, the handset
and base can communicate without tying up the phone line.
3 Press again or press o on handset to disconnect.
Base Ringer Volume Switch
Use to adjust how loudly the
base rings.
1450_book_1ATT 3/26 3/26/02 4:59 PM Page 10