Farm Star BX Series 48, 60, 72, 84 & 96 - Manual (Page 6)

Safety Information
All equipment is potentially hazardous. There is no substitute for a cautious, safe-minded operator who
recognizes potential hazards and follows reasonable safety practices.
When the use of hand tools is required to perform any part of assembly, installation, adjustment, maintaining,
repairing, removal, or moving the box scraper, be sure the tools used are designed and recommended by the
tool manufacturer for that specific task.
Personal protection equipment including safety glasses, safety shoes, and gloves are recommended during
assembly, installation, operation, adjustment, maintaining, repairing, removal, or moving the box scraper.
Always use two people to handle heavy, unwieldy components during assembly, installation, removal, or
moving the box scraper.
Never place any part of your body where it would be in danger if movement should occur during assembly,
installation, operation, maintaining, repairing, removal, or moving the box scraper.
Never place yourself between the tractor and box scraper while implement is in operation.
Do not work under a raised implement unless it is securely blocked or held in position. Do not depend on the
tractor hydraulic system to hold the implement in place.
A heavy load can cause instability of the tractor. Use extreme care during travel. Slow down on turns and
watch out for bumps. The tractor may need front counter-weights to counter-balance the weight of the
implement.
Never use alcoholic beverages or drugs which can hinder alertness or coordination while operating this
equipment. Consult your doctor about operating this machine while taking prescription medications.
Do not allow others to ride on the tractor with an operator. Riders are subject to injury such as being struck by
foreign objects or being thrown off. Riders obstruct the operator’s view resulting in unsafe operation. Never
allow anyone to ride on the implement!
Before you operate the box scraper, check over all pins, bolts and connections to be sure all are securely in
place. Replace any damaged or worn parts immediately.
Do not allow anyone who is not familiar with the safety rules and operation instructions to use this box scraper.
Never allow children to operate or be around equipment.
Use stabilizer bars, adjustable sway chains, or sway blocks on your tractor lift arms to keep the box scraper
from swinging side to side. Adjust as tightly as practical for best performance.
2 5
1 341642 Main Frame Weldment (BX - 48) 1
341652 Main Frame Weldment (BX - 60) 1
341661 Main Frame Weldment (BX - 72) 1
341681 Main Frame Weldment (BX - 84) 1
341691 Main Frame Weldment (BX - 96) 1
2 341641 Cutting Edge (BX - 48) 1
341651 Cutting Edge (BX - 60) 1
350405 Cutting Edge (BX - 72) 1
350029 Cutting Edge (BX - 84) 1
350105 Cutting Edge (BX - 96) 1
3 2503045 Bolt 5 / 8 ” – 11 NC x 1 1 / 2 ” Plow Var.
4 2502007 Washer 5 / 8 ” Springlock Var.
5 2500013 Nut 5 / 8 ” – 11 NC Full Hex Var.
6 341624 Strap, Toplink (BX - 48 Only) 2
341673 Strap, Toplink 2
7 341623 Strap, Tie (BX - 48 Only) 2
341674 Strap, Tie 2
8 590124 Spacer 1 3 / 8 ” Lg. (BX - 48 Only) AK-805 1
341672 Spacer 1 1 / 8 ” Lg. 1
9 2503002 Bolt 3 / 4 ” – 10 NC x 2” Hex Head 2
PART
NO. DESCRIPTION NO.
REQ.
REF.
NO.
10 2503066 Bolt 5 / 8 ” – 11 NC x 4” Hex Head (BX - 48 Only) 1
2503023 Bolt 3 / 4 ” – 10 NC x 4” Hex Head 1
11 2502001 Washer 3 / 4 ” Springlock Var.
12 2500002 Nut 3 / 4 ” – 10 NC Full Hex Var.
13 590108 Draw Pin Cat. I (AK-578) Opt. on BX - 48 2
13A 590096 Draw Pin Cat. 0 (BX - 48 Only) 2
14 341671 Back Blade Weldment (BX - 48) 1
341670 Back Blade Weldment (BX - 60) 1
341669 Back Blade Weldment (BX - 72) 1
341688 Back Blade Weldment (BX - 84) 1
341698 Back Blade Weldment (BX - 96) 1
15 2503004 Bolt 1 / 2 ” – 13 NC x 1 1 / 2 ” Hex Head 2
16 2500054 Nut 1 / 2 ” – 13 NC Hex Stamplock 2
17 341675 Shank, Scarifier w/ Tip (Ref. #18) Var.
18 341677 Replaceable Wear Tip Var.
19 341654 Pin, Lock Var.
20 590187 Hair Clip Pin (AK-2704) Var.
21 2500018 Nut 7 / 8 ” – 14 NF Jam Hex (BX - 48 Only) 2
22 2502005 Washer 7 / 8 ” Springlock (BX - 48 Only) 2
23 2500017 Nut 7 / 8 ” – 14 NF Full Hex (BX - 48 Only) 2
PART
NO. DESCRIPTION NO.
REQ.
REF.
NO.
BOX SCRAPER REPAIR PARTS