Farm Star LSF-30 - Manual (Page 14)

13 2
S A F E T Y I N S T R U C T I O N S (continued)
To prevent injury or death, use a tractor equipped with a Roll-Over Protective System (ROPS). Do not paint
over, remove or deface any safety signs or warning signs on your equipment. Observe all safety signs and
practice the instruction on them.
Never exceed the limits of a piece of machinery. If its ability to do a job, or to do so safely, is in question -
DON’T TRY IT.
Do not modify the equipment in any way. Unauthorized modification may impair the function and/or safety and
could affect the life of the equipment.
In addition to the design and configuration of this implement, including Safety Signs and Safety Equipment,
hazard control and accident prevention are dependent upon the awareness, concern, prudence, and proper
training of personnel involved in the operation, transport, maintenance, and storage of the machine. Refer also
to Safety Messages and Operation instruction in each of the appropriate sections of the Tractor and Loader
Manuals. Pay close attention to the Safety Signs affixed to the Tractor and the Loader.
Never use alcoholic beverages or drugs which can hinder alertness or coordination while operating this
equipment. Consult your doctor about operating this machine while taking prescription medications.
Review the safety instructions with all users annually.
This equipment is dangerous to children and persons unfamiliar with its operation. The operator should be a
responsible adult familiar with farm machinery and trained in this equipment’s operations. Do not allow per-
sons to operate or assemble this unit until they have read this manual and have developed a thorough
understanding of the safety precautions and of how it works.
EQUIPMENT SAFETY GUIDELINES
Keep safety signs clean and legible at all times.
Replace safety signs that are missing or have become illegible.
Replaced parts that displayed a safety sign should also display the current sign.
Safety signs are available from your Distributor or Dealer Parts Department or the factory.
Be sure that the installation area is clean and dry.
Be sure temperature is above 50˚F (10˚C).
How to Install Safety Signs:
SAFETY SIGNS
U Keep children away from dan-
ger all day, every day.
U Equip tractors with rollover
protection (ROPS) and keep all
machinery guards in place.
U Please work, drive, play, and
live each day with care and con-
cern for your safety and that of
your family and fellow citizens.
OPTIONAL BRACKET KIT #831285
FOR LOADERS WITH SINGLE BUCKET CYLINDER