Fairbanks 9104 FB Omnicell - Manual (Page 11)

Section 2: Company Service Information
07/13 11 51325 Rev. 1
2.2.5. Equipment Checkout
Position the equipment with these points in mind:
Intense direct sunlight can harm the display.
Do not locate near magnetic material or
equipment/Instruments which use magnets in their design.
Avoid areas which have extreme variations in room temperatures. Temperatures
outside the Instrument’s specifications will affect the weighing accuracy of this product.
Do not load the platform if there is any evidence of damage to the platform or
supporting structure.
2.2.6. Users’ Responsibility
All electronic and mechanical calibrations and/or adjustments required for making
this equipment perform to accuracy and operational specifications are considered
to be part of the installation.
─ They are included in the installation charge.
─ Only those charges which are incurred as a result of the equipment's inability to be
adjusted or calibrated to performance specifications may be charged to warranty.
Absolutely no physical, electrical, or program modifications other than selection of
standard options and accessories are to be made to this equipment.
The equipment consists of printed circuit assemblies
which must be handled using ESD handling
procedures, and must be replaced as units.
─ Replacement of individual components
is not allowed.
─ The assemblies must be properly packaged in ESD
protective material and returned intact for
replacement credit per normal procedures.