Fairbanks H90-3052-D Fairbanks Scales User Manual

Page 13

50144 Rev. 4

SECTION 5:
INSTRUMENT
SEALING

If the scale is to be used in a commercial
application, it must be “placed in service”
in accordance with the rules and
regulations of the local weights and
measures jurisdiction. Commercial
applications are the buying and selling of
products by weight, weighing for a charge,
or using weight as the basis to charge for
a service.

Once a scale has been calibrated and
“placed in service” by a technician, it must
be sealed with the proper sealing devices
and reported to the appropriate weights
and measures authority.

If the scale seal is broken or missing, the
seal is no longer accepted as proper for
commercial application.

For assistance in placing the scale in
Service, contact the nearest Fairbanks
Service Center.

To prevent unauthorized entry, two wire
seals are required. Sealing screws are
located in upper right and lower left of
the cover assembly.

1. Feed one end of a sealing wire

through the hole in sealing screw and
then through the small hole on the
edge of the cover.

2. Crimp the seal with tool #LSP-
100 or equivalent.

3. Repeat procedure with the second
sealing screw.