Fairbanks 26889 Slimline Health Scale - Manual (Page 9)

04/09 9 51142 Revision 2
Section 3: Operation
OPERATING CONTROLS
The keys for operating the scale are located on the display.
1. Press the [ZERO] key to reset the display.
─ The center-of-zero ( C) indication is displayed.
─ Zero Range is 100% of capacity for USA .
─ Zero Range is 2% of capacity for Canada .
2. The [ZERO] key function is inhibited when the instrument detects any of the
following conditions:
─ Motion on the platform.
─ An under-load condition.
─ An overload condition.
─ Outside of programmed Zero Range.
3. Pressing the [UNITS] key toggles the weighing units from lb to kg .
─ Set to the correct measure of units by moving the arrow indicator in the
display.
GENERAL OPERATING PROCEDURES
1. Place the scale on a level surface. Avoid placing the scale on carpet as this will
cause inaccurate weights.
2. Check the scale display and ensure it is at zero. If not, press the [ZERO] key.
3. Press the [UNITS] key to select the weighing units desired, lb or kg.
4. Stand on the scale platform and observe the weight on the display. If connected
to a computer, the computer may request the weight data to be sent.
5. Step off the scale and the weighing process is complete.