Fairbanks Series II Bench Scales - Manual (Page 13)

07/10 13 50777 - Rev. 6
A. Error message(s)
Symptom Cause Solution
Over load :
* Weighing range exceed
> Unload scale or reduce preload
Under load :
* Weighing pan not in place
> Ensure the weighing pan is
correctly installed and surrounding
parts are not touching
* Weighing range below zero > Set scale to zero
Zeroing not possible : > Ensure that zeroing is performed
in the admissible range
Low Battery Condition > Plug AC/DC adapter to scale to
* Below 5.5Vdc allow the battery to recharge.
Section 6: Service and Maintenance