FEC AFC1100 - Manual (Page 3)

)(& ,QF
9.2 Axis Unit Abnormal Help Screen Explanation
After the applicable ABNORMAL CODE and ABNORMAL SUB CODE have been identified
from the affected Axis unit a review of the following troubleshooting guide will identify the
nature of the failure and the recovery method.
Example:
Abnormal code 1 with an Abnormal sub code of 0 can be found immediately following this
example as "Code 1-0". The remainder of abnormal codes can be found in numerical order.
Chapter 9: Troubleshooting (Rev. 8/98)
Page 9-3