Elite Screens Reflexion Series - Manual (Page 3)

Rev. 091412-JA
www.elitescreens.com [email protected] 3
Detach the screen case from the base feet
Pull up the loop (eye-bolt) to release the spring-cleat and tilt the projection screen’s metal casing
forward away from the brackets. Lift the entire projection screen assembly up and away from the
bracket/cleat assembly.
Erecting the upright support
1. Remove the telescoping upright support from its cradle.
2. Insert the upright support into the socket on the center base foot.
3. Hang the suspension handle of the screen from either of the notches of the upright support.
Pull up the suspension loop to disengage Lift screen assembly up and away from the base foot