Elite Screens ezFrame Series - Manual (Page 3)

Rev.041014-JA www.elitescreens.com 3
Push
Push
( fig.2)
Insert the exposed ends of the joint connectors
into the short (vertical) frame and align the four
corners so that they meet at perfect right angles
Tension Rod (Horizontal) x 4
Tension Rod (Vertical) x 2
4.
Join
all
four
frame
parts
together
following
the
steps
shown
below.
(Fig.2)
Note:
When
assembled,
please
push
simultaneously
the
two
ends
of
the
long
frames.
Attaching the screen material to the frame
1. Unroll the screen material and lay it down on a clean surface. Then insert the tension rods separately into the
edges of all four corners of the material (see fig.3)
M5×15 screws
(Fig. 3)
Screen Material
Screen Material
push
push
push push
Tension
Rod
(Horizontal)
x
4
push
push
Tension
Rod
(Vertical)
x
2
Screw
( fig.3)