Elite Screens Evanesce Plus Series - Manual (Page 5)

Rev.040313-JA www.elitescreens.com 5
2. Attach the Turnbuckle (E) to the bottom of the Suspension Bar (F) and secure with the Hex
Screw (B), Washer (D) and Hex Nut (H).
3. Attach the Turnbuckle (G) to the Hanging Bracket (C) as shown in figure below. Install the Suspension
Bars (D) to your ceiling according to their distance.
4. Attach the end flange piece (C) on the long edge of the housing as shown below to complete the
assembly. The screen is now ready for installation.
B D D H
E
C
Rotate the turnbuckle
as needed to adjust
the height level.