Elite Screens Starling Series - Manual (Page 4)

V010914-JA www.elitescreens.com 4
Standard Accesories for Starling Series
A. RF remote B. IR remote
Operation
Electric current: The screen operates on AC110V at 60hz
1. Plug the screen’s power cord to a power outlet.
2. Once the screen has power you’ll be able to control it with the Infared or Radio Frequency remote and
the Wall switch box.
Control System
The Starling Series has Infrared and Radio Frequency receivers. You can control the screen’s
UP/STOP/DOWN positions utilizing either the IR (Infrared) or RF (Radio Frequency) remotes.
1. IR remote control
The IR remote control requires line-of-sight to the IR sensor. Make sure to point the IR remote directly to
the IR sensor located on the wall switch box.
Note: a. The IR remote has a range of 15 feet.
b. The IR sensor must not be covered or blocked.
2. RF remote control
The RF remote does not require line-of-sight and can be used up to 50ft.
Press the Down button to Drop the screen
Press the Stop button to Stop the screen
Press the UP button to Retract the screen
3. Wall switch box
The UP/STOP/DOWN control buttons are located on the side of the box.
For a local Elite Screens contact or Technical Support, please
visit www.elitescreens.com
Up
Stop
Down
IR sensor